The Surface winding slitting machine is suitable for the treatment of rolled materials such as aluminum foil, flat paper, insulating wrinkle paper, semi-conductive wrinkle paper, PET, PVC composite paper, aluminum foil coated paper, Kraft paper, double adhesive paper and so on. In the production process, the material can be trimmed and sliced according to the demand. The main machine adopts imported Panasonic frequency converter, winding magnetic powder tension control, Electronic counting meter counting; alarm to stop when material finished; automatic length setting, The cutting length can be set

 

The surface winding slitting machine is suitable for cutting materials with a thickness of 0.1 mm to 0.35 mm and a weight of 90 grams to 130 grams. The specific cutting ability still needs to be based on the actual material. The raw material core of the equipment is 3 inches as standard, and a 6-inch or 4-inch die can be selected

 

The unwinding adopts the design of separate shaft pneumatic feeding, which makes the unwinding operation more convenient and can be completed by only one person. The detection of the unwinding diameter is carried out automatically through the proximity switch at the unwinding drive shaft, and there is no need to manually enter the material thickness. At the same time, the residual coil diameter of discharge can be set, and once the set value is reached, the system will automatically slow down and stop to facilitate the feeding of the next roll of material.

 

Corrugated inflatable shaft (2 pieces) is used in rewinding. The advantage of this kind of inflatable shaft is that when the rewinding width is small, the rewinding material will be smoother. The rewinding structure can be designed with cantilever unloading and is equipped with two inflatable shafts with a diameter of 76mm. In the process of winding, the coiling mode of the double-shaft surface bottom roll can be selected, and the diameter of the bottom roller is 180mm, and the surface is plated. With the increase of the coil diameter, the winding system will be raised gradually, using electrical proportional valve to control

 

What is the minimum slitting width range of the machine?

18mm.

 

What is the warranty time of the machine?

12 months

 

 

 

 

 

 

 

 

 

 

http://www.sxslittingmachine.com/